LJD-B型介電常數介質損耗測試儀廠家

LJD-B type dielectric constant and dielectric loss tester

一、概述：

First, an overview:

LJD-B型介電常數介質損耗測試儀廠家是我公司研制生產的產品，自該產品實現銷售后，我公司工程師就一直持續不斷對產品改進升級；介電常數介質損耗測試儀廠家特別是在軟件上不斷地加以完善，改進了早期產品存在的不足之處，提高了測試精度，并增加新的功能。但近期我公司發現，一些沒有研發能力的公司，盜版了我公司早期產品的軟件，仿我公司的產品進行銷售，給不了解情況的客戶將帶來損失。因?yàn)檫@些產品的軟件存在不足之處，（如在主電容調節至80pf左右時，電容指示值會出現跳變，出現180pf左右的指示值；在介質損耗測試時，當材料的損耗較大時，介質損耗值會出現錯誤。）但又無法得到升級完善，產品沒有新增的功能。因此請廣大用戶注意識別。

LJD-B dielectric electric constant and dielectric loss tester is my company exclusive development and production of products, from the realization of the product sales, company engineers have been continuing to continuous product improvement and upgrade, especially in the software constantly perfected and improved the deficiencies existed in the early, to improve the accuracy of the test, and added new features. But recently we found that some no R & D capability of bad company, pirated software in my company's early products, imitation fake my company's products sales and to understand the customer will bring losses. Because of these products software shortcomings, as in the main capacitor is adjusted to about 80pf, capacitance indication value will appear to jump, value indicating 180pf about; in the dielectric loss test, when the errors will occur in the material loss is large, the dielectric loss value. But can not be upgraded and improved, the product has no new features. So please pay attention to the majority of users.

二、技術參數：

Two, technical parameters:

信號源頻率范圍： DDS數字合成 10KHz-70MHz

Signal source frequency range: DDS digital synthesis 10KHz-70MHz

Q測量范圍： 1-1000自動/手動量程

Q measurement range: 1-1000 automatic / manual range

信號源頻率覆蓋比： 6000:1

Signal source frequency coverage ratio: 6000:1

Q分辨率： 4位有效數,分辨率0.1

Q resolution: 4 bit effective number, resolution 0.1

信號源頻率精度： 3×10-5 ±1個字,6位有效數

Signal source frequency accuracy: 3 * 10-5 + 1 words, 6 effective number

Q測量工作誤差： 

Q measurement error: 

電感測量范圍： 15nH-8.4H,4位有效數,分辨率0.1nH

Inductance measurement range: 15nH-8.4H, 4 effective number, resolution 0.1nH

調諧電容： 主電容30-500PF

Tuning capacitor: main capacitor 30-500PF

電感測量誤差： 

Inductance measurement error: 

調諧電容誤差和分辨率：±1.5P或

Tuning capacitor error and resolution: + 1.5P or

標準測量頻點： 全波段任意頻率下均可測試

Standard measurement frequency point: the whole band can be tested at any frequency

Q合格預置范圍： 5-1000聲光提示

Q qualified preset range: 5-1000 sound and light tips

諧振點搜索： 自動掃描

Resonance point search: automatic scanning

Q量程切換： 自動/手動

Q range switch: automatic / manual

諧振指針： LCD顯示

Resonant pointer: LCD display

LCD顯示參數： F,L,C,Q,波段等

LCD display parameters: F, L, C, Q, band, etc.

三、夾具工作特性

Three, the characteristics of the fixture

1.平板電容器：

1 flat plate capacitor:

片尺寸：Φ50mm/Φ38mm 可選

Sheet size: Phi 50mm/ Phi 38mm optional

片間距可調范圍：≥15mm

Pole piece spacing adjustable range: 15mm

2. 夾具插頭間距：25mm±0.01mm

2 fixture plug spacing: 25mm + 0.01mm

3. 夾具損耗正切值≤4×10－4 （1MHz）

3 fixture loss tangent is less than 4 * 10-4 (1MHz)

4．測微桿分辨率：0.001mm

4 micrometer bar resolution: 0.001mm

四、配置：

Four, configuration:

主機一臺

Host a

電感九支

Inductance nine

夾具一套

Fixture set

隨機文件一套

Random file