Teledyne微燃料電池原理:
Teledyne氧傳感器是一個微量氧燃料電池，該電池由TAI公司設計和制造。是密封的、一次性的電化學傳感器。
微燃料電池的反應構件有：一個陰、一個陽以及浸泡它們的水溶KOH電解液，濃度為15%。電池將化學反應的能量轉換為外部電子電路的電流。它的原理類似于一個蓄電池。但是，微－燃料電池與蓄電池在工作原理上有一個很大的不同：在蓄電池中，所有的反應物都是在電池內的；而微燃料電池中，其中的一個反應物(氧)來自于設備外部，即一個被連續分析的樣氣。因此可以說，微－燃料電池是蓄電池與一個真正燃料電池的混血兒。(在一個真正的燃料電池中，所有的反應物都儲存在設備外。)
微燃料電池，氧傳感器
| 產品編號（PART No） |
類型（CLASS） |
用途（Application） |
| C06689-A2C |
A-2C |
測量酸性氣體或高濃度CO2中的氧濃度%含量 |
| C06689-A5 |
A-5 |
測量常規混合氣體或高濃度CO2中的氧濃度%含量 |
| C06689-B1 |
B-1 |
測量常規混合氣體中的氧濃度%含量；如：煙氣 |
| C06689-B2C |
B-2C |
測量H2、He、乙烯等氣體中無CO2的低濃度氧ppm含量 |
| C06689-B2CXL |
B-2CXL |
測量H2、He、乙烯等氣體中無CO2的超低濃度氧ppm含量 |
| C06689-B3 |
B-3 |
可用于測量煙氣中的氧濃度%含量；壽命優于B-1 |
| C06689-L2C |
L-2C |
測量常規氣體中的低濃度氧ppm含量 |
| C06689-L2CL |
L-2CL |
測量以CO2和H2混合背景的惰性氣體中的氧濃度ppm含量 |
| C06689-Z2C |
Z-2C |
可用于測量煙氣中的低濃度氧ppm含量 |
| C06689-E2 |
E-2 |
測量空氣分離-氮液化工藝中，氮中氧低濃氧含量；長壽命型 |
| B71875 |
INSTA TRACE |
測量酸性氣體或碳烴類氣體中超低濃度氧ppm含量 |
| B73106 |
INSTA TRACE CO2 |
測量酸性氣體中以CO2為背景氣體的超低濃度氧ppm含量 |
| 產品編號（PART No） |
類型（CLASS） |
用途（Application） |
| C06689-A2C |
A-2C |
測量酸性氣體或高濃度CO2中的氧濃度%含量 |
| C06689-A5 |
A-5 |
測量常規混合氣體或高濃度CO2中的氧濃度%含量 |
| C06689-B1 |
B-1 |
測量常規混合氣體中的氧濃度%含量；如：煙氣 |
| C06689-B2C |
B-2C |
測量H2、He、乙烯等氣體中無CO2的低濃度氧ppm含量 |
| C06689-B2CXL |
B-2CXL |
測量H2、He、乙烯等氣體中無CO2的超低濃度氧ppm含量 |
| C06689-B3 |
B-3 |
可用于測量煙氣中的氧濃度%含量；壽命優于B-1 |
| C06689-L2C |
L-2C |
測量常規氣體中的低濃度氧ppm含量 |
| C06689-L2CL |
L-2CL |
測量以CO2和H2混合背景的惰性氣體中的氧濃度ppm含量 |
| C06689-Z2C |
Z-2C |
可用于測量煙氣中的低濃度氧ppm含量 |
| C06689-E2 |
E-2 |
測量空氣分離-氮液化工藝中，氮中氧低濃氧含量；長壽命型 |
| B71875 |
INSTA TRACE |
測量酸性氣體或碳烴類氣體中超低濃度氧ppm含量 |
| B73106 |
INSTA TRACE CO2 |
測量酸性氣體中以CO2為背景氣體的超低濃度氧ppm含量 |
產品編號（PART No）
類型（CLASS）
用途（Application）
C06689-A2C
A-2C
測量酸性氣體或高濃度CO2中的氧濃度%含量
C06689-A5
A-5
測量常規混合氣體或高濃度CO2中的氧濃度%含量
C06689-B1
B-1
測量常規混合氣體中的氧濃度%含量；如：煙氣
C06689-B2C
B-2C
測量H2、He、乙烯等氣體中無CO2的低濃度氧ppm含量
C06689-B2CXL
B-2CXL
測量H2、He、乙烯等氣體中無CO2的超低濃度氧ppm含量
C06689-B3
B-3
可用于測量煙氣中的氧濃度%含量；壽命優于B-1
C06689-L2C
L-2C
測量常規氣體中的低濃度氧ppm含量
C06689-L2CL
L-2CL
測量以CO2和H2混合背景的惰性氣體中的氧濃度ppm含量
C06689-Z2C
Z-2C
可用于測量煙氣中的低濃度氧ppm含量
C06689-E2
E-2
測量空氣分離-氮液化工藝中，氮中氧低濃氧含量；長壽命型
B71875
INSTA TRACE
測量酸性氣體或碳烴類氣體中超低濃度氧ppm含量
B73106
INSTA TRACE CO2
測量酸性氣體中以CO2為背景氣體的超低濃度氧ppm含量
Application overview
RANGE
BACKGROUND GAS
TELEDYNE INSTRUMENTS
SENSOR OPTIONS
Trace
Less than 1000 ppm CO2 in the background gas
311, 316, 317, 318, 3160
B-2C
3000T series
L-2C
More than 1000 ppm up to CO2 in the background gas
All trace oxygen instruments
A-2C
Note: To use the A-2C or B-2C sensor in a 3000T series instrument, adapter part number B66378 is required.
Note: The L-2C sensor cannot be used in our older analog models (300 series).
Percent
Less than 1000 ppm CO2 in the background gas
311P, 320A / P / BRC, 326, 327, 328
B-1, B-3 standard;
C-3 for high concentration of O2
More than 1000 ppm up to CO2 in the background gas
A-5
Selecting a Teledyne Oxygen Sensor - Detail
CLASS
(click for spec control drwg.)
PART No.
APPLICATION
COMMENTS
A-1
oxygen sensor
C6689-A1
Ultra-fast response (90% in less than 4 seconds) in the percent oxygen region.
Use only when B-1 response time is insufficient.
A-2C
oxygen sensor
C6689-A2C
Used for trace O2 measurements in CO2 containing backgrounds (0.1- CO2). CO2 must be present.
Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
A-2CXL
oxygen sensor
B74033-A2CXL
Specially qualified A2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.
Use where acid gases are present (CO2, HCl, HCN, etc). CO2 must be present.
A-2Cl: Obsolete, use A-2C
A-3: Obsolete, use A-5
A-5
oxygen sensor
C6689-A5
Intermittent or continuous monitoring of percent O2 in gas mixtures containing 0- CO2. 90% response is time is 45 seconds.
Has more tolerance to exposure to air than A-3. No restrictions on CO2 concentration.
B-1
oxygen sensor
C6689-B1
General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds).
Use B-3 or C-3 where longer life is required and response time is relatively unimportant. May be used to spot check flue gas.
B-2C
oxygen sensor
C6689-B2C
General purpose trace O2 analysis for use in inert gas and hydrocarbon streams. Low range limit is 0-10 ppm.
May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.
INSTA TRACE
oxygen sensor
B71875
Special patented construction provides rapid recovery, during initial cell installation, to low PPM levels by reducing the recovery period from several hours to just minutes. Low range limit is 0-10 ppm.
Used for trace O2 analysis in inert gas and hydrocarbon streams.
B-2CXL
oxygen sensor
C6689-B2CXL
Specially qualified B-2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.
May be used in CO2 free gas streams containing highly mobile gases such as H2, He and ethylene.
B-3
oxygen sensor
C6689-B3
Percent O2 analysis, best compromise between long life and fast response.
May be used to spot check flue gas.
B-4C
oxygen sensor
C14613-B4C
Trace O2 cell specifically designed for the Model 317EXI.
Same performance as the B-2.
B-5
oxygen sensor
C45091-B5
Special application cell (non-standard) where long life and moderately fast response are required; B-5 has a factor of 3x the life of a B-3.
Requires 3x the amplifier gain of the B-3. Expected life is 36 months in air.
B-5F
oxygen sensor
C45091-B5F
Special application cell (non-standard) where long life and moderately fast response, in the presence of CO2, are required.
Uses Type F (acid electrolyte). Requires higher amplifier gain than normal. 90% response time is 13 seconds. Expected life in air is 6 months.
B-7
oxygen sensor
C45091-B7
Special application cell (non-standard) where fast response is required; the B-7 has a factor of 3x the life of a B-1 cell.
Requires 3x the amplifier gain of the B-1. Expected life in air is 24 months.
B-7F
oxygen sensor
C45091-B7F
Special application cell (non-standard) where moderate life and fast response, in the presence of CO2, are required.
Requires higher amplifier gain than normal. 90% response time is 7 seconds. Expected life in air is 3 months.
C-1
oxygen sensor
C6689-C1
Rarely used. Schematic for reference only.
免責聲明：以上所展示的[C06689-B1 Teledyne燃料電池]信息由會員[成都聚飛科技有限責任公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
