ZY615數顯氧指數測定儀
Digital display oxygen index apparatus
一、符合標準：Conform to the standard:
符合GB/T2406《塑料燃燒性能試驗方法---氧指數法》以及JIS7201、BS2782、ANSI/ASTM、D2863、ISO4589、試驗標準。
In line with the GB/T2406 "plastic combustion performance test methods - oxygen index method and JIS7201, BS2782,
ANSI/ASTM, D2863, ISO4589, test standards.
二、適用范圍：Scope of application:
用于判斷材料在空氣中與火焰接觸時燃燒的難易度，適用于均質固體材料、層壓材料、軟片和薄膜材料。
Used to judge the material in contact with the flame in the air when it is the ease of burning, applicable to
homogeneous solid materials, laminated material, film and thin film materials.
三、主要參數:The main parameters:
3.1氧氣濃度(氧指數)：為數顯直讀
3.2氧氣濃度(氧指數)傳感器:美國進口.
3.3三個壓力表分別提供氧氣輸出壓力、氮氣輸出壓力和混合氣體輸出壓力，可通過調節閥調節氣壓大小。
3.4測量范圍：0-80%，分辨率：0.1L/min
3.5測量精度：2.5級
3.6燃燒筒：石英玻璃筒，內徑：100mm 高度：500mm
3.7燃燒筒頂部氣體流速：90mm±10mm/s
3.8燃燒筒內氣體流速：40mm±2mm/s
3.9輸入壓力：0.25～0.5 Mpa可調；
3.10氧氣、氮氣混合氣體入口：包括穩壓閥、流量調節閥、氣體過濾器和混合室。
3.11試樣夾可用于軟質和硬質塑料。
3.12點火器：專用丁烷手持式電子電火器
3.13氣體：工業級氧氣、氮氣。
3.14計時器準確度：±0.5s
3.15電源要求：AC220（±10%）V/50HZ 。
3.1 the oxygen concentration (oxygen index) : for digital display direct reading
3.2 the oxygen concentration (oxygen index) sensor: the United States imports.
3.3 three gauges provide oxygen respectively output pressure, nitrogen output pressure and mixed gas output
pressure, size can be adjusted through regulating valve pressure.
3.4 measuring range: 0-80%, resolution: 0.1 L/min
3.5 accuracy: 3.5 on the Richter scale are unlikely
3.6 combustion cylinder, quartz glass tube, inner diameter: 100 mm height: 500 mm
3.7 combustion tube at the top of the gas flow rate: 90 mm - 10 mm/s
3.8 the combustion velocity of gas inside the cylinder: 40 mm + / - 2 mm/s
3.9 input pressure: 0.25 ~ 0.5 Mpa is adjustable;
Oxygen, nitrogen mixture gas inlet 3.10: including voltage regulator valve, flow regulating valve, gas filter and
mixing chamber.
3.11 the sample holder can be used in the soft and hard plastic.
3.12 igniter: special butane handheld electronic electricity firearms
3.13 gas: industrial oxygen, nitrogen.
3.14 timer accuracy: + / - 0.5 s
3.15 the power requirement: AC220 (plus or minus 10%) V / 50 hz.
聯系方式：東莞中諾（臺灣）質檢儀器設備有限公司
Contact: dongguan (Taiwan) quality inspection instrument equipment co., LTD
（轉）815
（艾新華）
/
/3836926922
本頁產品地址：http://jssdj.com/sell/show-4486705.html
免責聲明：以上所展示的[艾生-TEL-13723549851 數顯氧指數測定儀]信息由會員[東莞中諾質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
