| 提交詢價信息 |
| 發布緊急求購 |
價格：電議
所在地：江蘇 蘇州市
型號：
更新時間：2014-05-26
瀏覽次數：1204
公司地址：
張金雨(先生)
ATC1500-SX適用于電源廠OQC出貨檢驗或生產線在線測試，可根據客戶要求變頻測試，同時可迅速自動轉換成測試報表。
同時有效的排除了人們手工測試產生錯誤的可能性，從而降低了客戶的退貨率!
系統主要:
ATC1500-SX系統配置:
系統測試項目：
自動測試控制軟件：
系統技術參數：
|
Test Name |
Parameter and Range |
Accuracy |
|---|---|---|
|
START UP |
Inrush current: 0 – 83Apk Startup time: 0 to 32767msec. Output voltage overshoot: 0 – 60Vpk |
±1% ±1ms ±1% |
|
UVLO |
Functional test only, Pass/Fail |
N/A |
|
IDLE |
Standby input power: 0 – 150W Standby input current: 0 – 10Apk Input voltage: 30 – 280V |
±0.1% ±0.1% ±0.1% |
|
STANDARD CV (Constant Current and Constant Resistance load) |
CC Mode: 0 – 15 A CR Mode: 0.1 – 50Ohm Input voltage: 30 – 300Vrms Input Current: 0 – 10Apk Input Power: 0 – 200W Power Factor 0 – 1.0 Output Voltage 0 – 60Vdc Output Current 0 – 1dc Efficiency: 0 – Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV |
±0.15% ±0.3% ±0.1% ±0.1% ±0.1% ±0.2% ±0.05% ±0.1% ±0.25% ±2% ±2% |
|
STANDARD CC (Constant Voltage and Constant Resistance load) |
CV Mode: 0 – 60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 300Vrms Input Current: 0 – 10Apk Input Power: 0 – 200W Power Factor 0 – 1.0 Output Voltage 0 – 60Vdc Output Current 0 – 1dc Efficiency: 0 – |
±0.15% ±0.3% ±0.1% ±0.1% ±0.1% ±0.2% ±0.05% ±0.1% ±0.25% |
|
SHORT CIRCUIT |
Input voltage: 30 – 300 Vrms Input Current: 0 – 10Apk Input Power: 0 – 200W Power Factor 0 – 1.0 Output Average Current: 0 – 1dc |
±0.1% ±0.1% ±0.1% ±0.2% ±0.2% |
|
OVER CURRENT |
Current trip point: 0 – 1dc Trip point voltage: 0 – 60Vdc Wait Time >= 10msec. Wait Time < 10msec. Voltage Before Trip Point: 0 – 60Vdc |
±0.1% ±0.05% ±0.1% ±0.1% |
|
OVER VOLTAGE |
OV trip point: 0 – 60V |
±0.1% |
|
LINE REGULATION |
Voltage regulation: 0 – |
±0.1% |
|
LOAD REGULATION |
Voltage regulation: 0 – |
±0.1% |
|
Average Efficiency |
Efficiency: 0 – |
±0.25% |
|
I-V Curve |
All DC parameters based on Standard CV and Standard CC |
N/A |
|
POWER DOWN |
Holdup time: 0 – 65535 msec. Input voltage: 30 – 300Vrms Output Current 0 – 3/1dc Output voltage overshoot: 0 – 60Vpk |
±1ms ±0.1% ±0.1% ±1% |
|
Global Setting |
Load On Voltage: 0 – 60Vdc Wait Time: 0 – 32767msec. Nominal Output Voltage: 0 – 60Vdc Nominal Output Current: 0 – 1dc |
±1% ±1ms ±1% ±1% |
|
Optional Setting |
Bias Output Voltage : 0 – 28Vdc Relay State rated current: 3A |
±0.2% - |
概述:
應用特性：
訂購信息：
免責聲明：以上所展示的[ ATC1500-SX電源自動測試系統]信息由會員[深圳市新能基科技（蘇州）有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
