本公司是聚集各大企業優質產品直接廠家供貨。供貨方有我方(可加工產品及包裝Logo、廣東、中山、永康、寧波、東陽、杭州、溫州等各大資名企業。專業經營高、中檔計量器具的知名企業.公司主要經營:精密天平稱、電子珠寶口袋稱、電子廚房稱、家用稱、手提稱、電子計數稱、電子計重稱、電子條碼稱、身高體重稱、紅外線脂肪水份稱、電子人體稱、人體健康稱、量具儀表、游標卡尺、電子外徑千分尺、測厚儀、腳踏封口機、自動封口機、沖氣封口機、手壓封口機、臺式封口機、刃具儀表等系列產品.公司產品測量精密度高,性能穩定,產品遠銷歐美、澳洲及東南亞,深受用戶好評。愿以最優的產品、最好的服務與您真誠合作，共創未來。謝謝合作！

特點：
*三列數位式LCD顯示
*同時顯示室內外溫度及濕度。
*可在任何時間選擇℃或℉單位，切換鍵位于儀器背面
*可每天記錄室內外zui大或zui小溫度及濕度值。
*儀器背后有一掛扣位及一撐板，可掛在墻壁或擺在桌上。
*1.5米室外溫度傳感器
溫度測量范圍：室外：-50℃~70℃ -58℉~158℉
室內：-10℃~50℃ 14℉~122℉
解析度：0.1℃
濕度測量范圍：25%RH~98%RH
解析度：1%RH
準確精度：±1℃ ±5%RH
更換電池：使用AAASIZE之電池（1.5VDC）
請依據下列步驟更換電池：
1、打開在支架下方之電池蓋。
2、依照正負指示放入電池。
3、蓋好電子蓋

室內外溫度及濕度測量方法：
*按MAX鍵顯示目前環境zui高室內外溫度值及zui高濕度值。
*按MIN鍵顯示目前環境zui低室內外溫度值及zui低濕度值。
*按RESET鍵清除目前環境的zui高低室內外溫度及濕度值，重新正常量測

Characteristic:
*3 line lf LCD display
*Show the outdoor temperature/humidity and indoor temperature/humidity at the same time.
*Select℃ or ℉ anytime by pushing the buttons on the back of the instrument.
*Recording the highest or lowest temperature/humidity value every day.
*The instrument has one string to deduct location behind one’s back prop up the board,
can hang on the wall or put on the desk
*Max outdoor temperature sensing distance:2M
Temperature survey range:
Outdoor:-50℃ to 70℃ -58℉ to 158℉
Indoor:-10℃ to 50℃ 14℉ to 122℉
Analyze degree:0.1℃
Accurate precision: ±1℃
Humidity survey range :25%RH to 98%RH
Analyze degree:1%RH
Accurate precision: ±5%RH
Change the battery :Use the battery (1.5VDC) of AAA Size
Please change the battery according to the following steps:
1,the battery opened below the support is covered;
2,put the battery in accordance with the instructions of straight negative pole;
3,cover the battery properly to cover.
The outdoor and indoor temperature/humidity survey method:
*Press MAX key and measure the highest temperature/humidity value inside and outside the room of the environment at present.
*Press MIX key and measure the lowest temperature/humidity value inside and outside the room of the environment at present.
*The internal and external the highest temperature/humidity or the lowest temperature/humidity of environmental room is written down to press RESET key and remove at present, quantity is examined and will go on automatically again.