自動蒸餾試驗儀

AD-6

   GB/T 6536

   ASTM D86, D850, D1078

  ISO 3405, IP123, JIS K2254

Model AD-6 automatically performs distillation test of petroleum products as well as narrow boiling range samples. Tanaka’s 6th generation model in the series has been developed as an eco-friendly automated distillation tester using a Peltier system which does cooling/heating of the condenser as well as cooling of the cylinder compartment.

AD-6型自動蒸餾試驗儀是“田中科學機器制作株式會社”第六代產品，不僅保持和改善了原系列型號的操作簡單、重復性好等特點，而且使用了內藏式半導體制冷器，使整個儀器結構合理緊湊。

AUTOMATIC MEASUREMNT

Test parameter for each sample type is programmed prior to tests. Typical sets of test parameters are programmed prior to tests and recalled before each test run. After setting the sample, just press the START key; the distillation proceeds automatically. The vapor temperature and the actual distillation curve are displayed on a real time bases. Finally, the test results are printed out by built-in printer, and if a PC is connected, the test results are transmitted to the PC(ADMgr) or LIMS.

只需要設定幾個簡單的試驗參數，按下“STATRT”就可以自動進行試驗。試驗過程達到了全自動化，大液晶顯示屏能清晰地顯示出餾程曲線和試驗數據，試驗結果可打印輸出，或通過聯網的計算機接收后，匯總分析。

FULLY SELF-CONTAINED DESIGN

All the necessary electronics and mechanics are contained in one casing for ease of use and higher reliability. Smallest footprint (as of 2002) fits on a lab bench easily.

儀器采用整體獨立設計，集成了控制電路和機械機構。測試部分可靠而高效。體積小巧，可放置在試驗臺上。

ADVANCED FIRE CONTAINMENTS SYSTEM

Mechanical shutter with N2 gas injection (standard, N2 gas supply required) helps controlling fire, should the sample catches fire.

Note: Although AD-6 is equipped with a fire containment system, it is essential that the AD-6 be attended and other means of putting out fire be available at all time during a test.

儀器需要外接氮氣保護。一旦發生火警，儀器可自動關閉并滅火。

注意：即使AD-6有著可靠的安全保護措施，在試驗過程中，按試驗規范，必須有人員在現場監護，以免意外發生。

TANAKAAutomated Distillation Tester Model: AD-6

CONFORMING STANDARDS: （適用標準）

ISO 3405, ASTM D86, IP123 for distillation test of petroleum products. (groups 1,2,3,4)

ASTM D850 for distillation test of industrial aromatic hydrocarbons (with an optional accessories) ASTM D1078 for distillation test of volatile organic liquids (with an optional accessories)

儀器適用于ASTM D86規定的1～4類油品的試驗

配合不同的附件也可用于ASTMD850、D1078規定的苯類蒸餾試驗。

VAPOR TEMPERATURE MEASURMENT: （溫度控制）

Selectable from 0 oC to 300oC/400 oC (fuel oil) or 0 oC to 200oC/400 oC (ASTM D850, D1078) by PT-100 ±0.1 oC accuracy

蒸餾范圍：0-300/400℃（油類） ； 0-200/400℃（ASTM D850, D1078)

控溫精度：PT-100 鉑電阻。±0.1 ℃

MENISCUS DETECTION: （餾出量控制）

By photoelectric devices with pulse motor 光電檢測的液面跟蹤系統

DISTILLATION RATE: 餾出速度

Selectable form 2.0 to 9.0ml/min with 0.5 increment 2～9ml/分,可按0.5ml為單位選擇

DISPLAY: （顯示）

Monochrome LCD (120mm x 90mm) Distillation curve and other test parameters, status, and trouble message displayed

單色大顯示屏（120mm x 90mm）可顯示大量信息，包括試驗設定，試驗過程，試驗結果，描繪蒸餾曲線和顯示出錯信息。

CONDENSER TUBE:

Brass tube (standard) or stainless steel tube (option) Controlled at 0 to 70 oC by Peltier elements

全不銹鋼制冷凝管溫度范圍: 溫度控制在0～70℃

RECEIVER ROOM: （接受室）

Controlled at 10 to 70 oC by Peltier elements 溫度控制范圍 10-70℃

SAFETY FEATURES: （安全防護）

Heater shuts down at the upper end of the scale (200/300/400oC). Upon detecting fire by thermofuse, warning buzzer beeps, heater shuts down, and fire containment system activates. The fire containment system consists of a mechanical shutter and N2 gas injector.

加熱過程一旦超出試驗的限定范圍(200/300/400℃)，儀器能夠自動及時關閉加熱爐并警報提示用戶。一旦發生火警意外。儀器也能夠在外接氮氣保護時。自動進行滅火操作。

ERROR MESSAGES: （出錯警示）

In case of detecting an error or equipment abnormality, the corresponding error message is displayed and the buzzer beeps. PRINTER: Built-in, thermal type

發生異常情況時，報警器鳴叫，顯示屏上顯示出相關信息，并能夠打印輸出。

COMPUTER OUTPUT: （計算機聯機）

RS-232C (9P), 1 channel  RS-232C標準接口 1

UTILITY REQUIREMENTS: （電源/氮氣保護）

100, 120, 220 or  240VAC, 1.5kW 50/60Hz,

External N2 gas supply (for fire containment system) 外接氮氣保護 （自動滅火系統）

OPERATING TEMPERATURE:（環境要求）

10 ℃ to 30℃

DIMENSION & WEIGHT: （體積/重量）

400mmW x 520mmD x 710mmH, 55kg

ORDERING INFORMATION: （訂購要求）

STANDARD ACCESSORIES: （標準附件）

1.Distillation Flask, 125ml 蒸餾燒瓶125ml	1 pc
2.Graduated Cylinder Assy, 100ml 接收瓶100ml	1 pc
3.Flask Support Board, 38mm ID 燒瓶支板38mm	1 pc
4.Flask Support Board, 50mm ID 燒瓶支板50mm	1 pc
5.Temperature Sensor for Fuel Oils 溫度傳感器（燃料油專用）	1 pc
6.Temperature Sensor Centering Device  硅橡膠塞 No.3	1 pc
7.Silicon Stopper for Flask (vapor tube)  硅橡膠塞 No.0A	1 pc
8.Spare Thermofuse 溫度保險絲	3 pcs
9.AC Power Cord, 3.0m (or 2.5m (>AC200V)     電源線 3m (	1 pc
10.Instruction and Maintenance Manual 說明書+維修保養手冊	1 copy

OPTIONAL ACCESSORIES: （推薦附件）

1     Temperature Sensor for ASTM D850, D1078 （ASTM D850, D1078溫度檢測傳感器）

2     Flask for ASTM D850, D1078, 200ml （ASTM D850, D1078蒸餾燒瓶）

3     Silicone Stopper No.6 for Temperature Sensor for 200ml Flask（干點）硅橡膠塞 No.6

4     Flask Support Board for D850, 25mm ID燒瓶支板25mm

5     Flask Support Board for D1078, 32mm ID燒瓶支板32mm

6     Flask for 10% Distillation Residue, 250ml （10%餾分試驗燒瓶）

7     Cylinder for 10% Distillation Residue, 200ml （10%餾分試驗接收瓶）

8     Dry Point Sensor with Centering Device for 125ml Flask干點檢測傳感器

9     Dry Point Sensor with Centering Device for 200ml Flask干點檢測傳感器

10    Barometric Pressure Sensor氣壓檢測傳感器

11    Stainless Steel Condenser Tube for corrosive samples (Factory Option) 不銹鋼冷凝管

12    ADMgr Kit(communication software for WindowsXP/Vista, converters and cables) 管理軟件（支持WindowsXP/Vista，包括聯機線和轉換接頭）

.